48kg Front Terminal Battery 150ah 12v Deep Cycle AGM Battery For UPS Communication System

48kg Front Terminal Battery 150ah 12v Deep Cycle AGM Battery For UPS Communication System

>Overview

The front terminal battery is called the front terminal battery because the terminals are special. Sometimes when multiple groups are connected in series or in parallel, the installation is not very convenient because of the terminals, so there is a front terminal battery.
 

The technical performance and safe and reliable performance of the front terminal battery can meet the requirements of the power supply of the communication base station, and the specific energy and other performance of the front terminal battery are better than that of the 2V battery.
 

1. The technical performance of the front terminal battery is reliable and can fully meet the requirements of the communication base station
 

2. The use of front terminal battery can reduce energy consumption and environmental pollution.
 

3. The use of front terminal battery can be more convenient for installation during configuration and use
 

4. The use of front terminal battery can reduce the device volume and floor load-bearing requirements of the system, which can greatly reduce the cost of the system.
 

The front terminal battery is a long and narrow type with a design life of 15 years. It uses thick 3D curved plates and nano colloidal electrolyte technology. It has long cycle life, low floating charging current and stable high temperature performance. The narrow structure of the front terminal design is easy to install and maintain, and is fully compatible with the standard 19 '/ 23' cabinet / rack. It is suitable for outdoor telecommunications base stations, solar and wind energy systems without temperature control and frequent power outages.

>Main Features

- Long service life

- High discharge rate

- Low self-discharge rate

- Deep cycle

- Super cycling ability

- Excellent high current performance

- Safe and reliability

- No memory effect

- Variety of installation

- High temperature resistance

- Vibration resistance

- Wide operating temperature range

 

 

>Specification

​

Battery Model No.		FBR12-150FT
Nominal Voltage		12V
Capacity (25ºC)	20HR(10.8V)	150Ah
	10HR(10.5V)	132Ah
	1HR(9.6V)	90Ah
Dimension	Length	551±2mm
	Width	110±2mm
	Height	287±2mm
	Total height	287±2mm
Approx. Weight		48kg±4%
Terminal type		F14
Internal resistance (Fully charged,25ºC)		Approx4.2mΩ
Capacity affected by temperature(20HR)	40ºC	102%
	25ºC	100%
	0ºC	85%
	-15ºC	65%
Self-discharge (25ºC)	3month	Remaining Capacity:91%
	6month	Remaining Capacity:82%
	12month	Remaining Capacity:65%
Nominal operating temperature		25ºC±3ºC(77ºF±5ºF)
Operating temperature range	Discharge	-15ºC-50ºC(5ºF-122ºF)
	Charge	-10ºC-50ºC(14ºF-122ºF)
	Storage	-20ºC-50ºC(-4ºF-122ºF)
Float charging voltage (25ºC)		13.5 to 13.8V Temperature compensation:-18mV/ºC
Cyclic charging voltage (25ºC)		14.5 to 15V Temperature compensation:-30mV/ºC
Max charging current		45A
Max discharging current		1200A(5sec.)
Designed floating life(20ºC)		12years

 

 

>Structure and composition

 

Component	Positive plate	Negative plate	Container	Cover	Separator	Electrolyte	Safety valve	Terminal
Raw material	Lead dioxide	Lead	ABS	ABS	AGM	Sulfuric acid	Rubber	Copper

 

​

 

 

>Constant Current Discharge Characteristics(A,25ºC)

 

F.V/Time	10min	15min	30min	60min	2h	3h	4h	5h	8h	10h	20h
9.6V	317	244	146	89.9	54.8	39.0	31.5	26.9	18.5	15.3	8.09
9.9V	308	239	143	88.6	54.5	38.8	31.3	26.8	18.4	15.2	8.08
10.2V	295	230	139	86.3	54.0	38.5	31.1	26.6	18.3	15.2	8.05
10.5V	282	222	136	84.5	53.2	38.3	30.9	26.4	18.2	15.1	8.01
10.8V	266	210	131	81.9	51.8	37.1	30.0	25.6	17.6	15.0	7.95

 

 

>Constant Power Discharge Characteristics(Watt,25ºC)

 

F.V/Time	10min	15min	30min	60min	2h	3h	4h	5h	8h	10h	20h
9.60V	3426	2684	1641	1025	635	459	371	318	220	182	97.1
9.90V	3323	2620	1608	1010	631	456	368	316	219	182	96.9
10.2V	3186	2523	1559	984	625	453	366	314	217	181	96.6
10.5V	3049	2437	1521	964	616	450	363	312	216	180	96.1
10.8V	2878	2308	1465	934	600	436	352	303	209	179	95.4

 

 

>Discharge diagram

 

>Application

1. Solar and wind energy storage system;

2. EPS and UPS battery backup;

3. Signal system , emergency lighting system , security system;

4. Telecommunication Equipment;

5. Power source for portable devices or tools.

 

>Production process

 

>FAQ

 

Q1: How to choose the right battery?

A1: Tell us your demand, then our sales will recommend a suitable battery for you.

Q2. Do you have any MOQ limit?

A2: Yes, we have MOQ for mass production, it depends on the different model numbers. 50-500pcs sample order is available. for sample checking is available.

Q3. Is it OK to print my logo on the product?
A3: Yes. Please inform us formally before our production and confirm the design firstly based on our sample.

Q4: How to solve the technical problem?
A4: 24 hours after-service consultancy just for you and to make your problem to solve easily.

Q5:. What certificate your company have?

A5: ISO 9001, ISO 14001, OHSAS 18001, CE, UL, IEC 61427 test report, Patent for gel technology and other Chinese honor.

Q6. What is your warranty time for VRLA battery ?

A6: It depends on battery capacity, depth of discharge, and battery usage.

 

Please kindly contact us for accurate information based on detailed requirements.

Q7. Why battery has different capacity at different hour rate?

A7: The capacity of a battery, in Ahs, is a dynamic number that is dependent on the discharge current. For example,

 

a battery that is discharged at 10A will give you more capacity than a battery that is discharged at 100A. With the 20-hr rate,

 

the battery is able to deliver more Ahs than with the 2-hr rate because the 20-hr rate uses a lower discharge current than the 2-hr rate.

Q8. Are you a battery manufacturer, and do you produce the plate by yourself ?

A8: Yes, we are a professional battery manufacture in Fujian Province, China. And we produce plates by ourselves.

Q9. How to proceed with an order?

A9. Firstly let us know your requirements or application.

 

Secondly, We quote according to your requirements or our suggestions.

Thirdly customer confirms the samples and places a deposit for formal order.

Fourthly We arrange the production.

Q10: How about the delivery time?

A10: About 7 days for stock products, around 20 days for half container products, 30 days for 20ft full container products.