|Battery Type:||Sealed Maintenance||Product Name:||Motorcycle Battery|
|Plate Purity:||100%||OEM Accept:||Yes|
|Color:||Orange||Feature:||Low Self Discharge|
YTX4LBS Motorcycle Lead Acid Battery,
100% Purity 12V 7ah 10HR,
Deep Cycle ytx4lbs battery
YTX4L BS Motorcycle Lead Acid Battery 12V 3.5ah sealed lead acid motorcycle battery
> Features of MF Motorcycle Battery
YTX4L-BS is a 12V 3.5AH 50 Cold Cranking Amps (CCA) Sealed Lead Acid (SLA) Battery;
Polarity: Negative on left, Positive on right. Listing is for the Battery and Screws only.
No wire harness or mounting accessories included.
SLA / AGM spill proof battery has a characteristic of high discharge rate, wide operating temperatures,
long service life and deep discharge recover.
Rechargeable battery that can be mounted in any position, resists shocks and vibration.
Long lasting high performance in high and low temperatures.
Backed by a 30 day refund policy and full 1 year warranty.
|Battery Model No.||YTX4L|
|Operating temperature range||-20℃-50℃(-4℉-122℉)|
|Standard charging method(25℃)||Current||0.9A|
|Quickly charging method(25℃)||Current||4.5A|
|Raw material||lead dioxide||lead||ABS||ABS||AGM||Sulfuric acid||Rubber||Copper|
>Delivery & Payment Terms
|EXW||30% in advance for deposit payment, the balance payments will be paid before shipment.|
|CFR/C&F||30% in advance for deposit payment, the balance will be paid against copy of B/L|
|L/C||For the amount of one shipment above 50,000 usd, L/C at sight is acceptable.|
For the amount less than 5000 usd
|Delivery Time||7~25 days after receiving the payment or the deposit payment|
>How to maintain the battery?
●Check the liquid level regularly, if the liquid level is below the horizontal line. Please fill up to the upper level with distilled water or purified
water in time. Never add sulfuric acid to dissolve waves. After adding liquid, the locomotive should be run for a period of time to make the
electrolyte mixed evenly:
●If the battery has no electrolyte. Or the battery is short of about half of the electrolyte or overcharged, the life of this battery is basically
terminated, even if it can be used after adding the electrolyte, the time will not be too long. . If the battery is in use, there is no battery
solution. It means that if the charging current is too large, the capacity and life of this kind of dried electro-hydraulic battery will be sharply
reduced, and it will even fail directly. .If the battery power is insufficient, please remove the battery to recharge it in time. If the battery is not
charged in time, used for a long time without full charge, etc., it will cause the battery to vulcanize, reduce the battery capacity and shorten
the life, and even the battery cannot be used.
●It should be noted that the battery has been in the state of power for a long time,-part of the active material lead dioxide (pbo2) will always
become dense lead sulfate (pbso4) and cannot be reduced to lead dioxide (pbo2), resulting in a decrease in capacity and a shortened life: If
the battery is not charged for a long time after being discharged, the lead dioxide (pbo2) will become dense lead sulfate (pbso4) and then can
no longer be reduced to lead dioxide (pbo2). This will lead to the end of battery life.
●Even if the battery is in normal use, it must be fully charged by removing the low current from the car during 3.5 months.
●When using the battery to start the locomotive, the starting time cannot exceed 5 seconds each time. If the locomotive fails to start, it must be
restarted after an interval of 15 seconds.
●The battery after filling should be used in time. If it is not used for a long time for some reason, please remove it from the car. Charge it
regularly every month
●Keep the battery clean, keep the exhaust pipe unblocked, and start the locomotive with your foot in the winter morning to increase the engine speed.
1. By T/T , 30% T/T in advance,70% before shipment
2. By L/C at sight
3. Western Union, Money gram or cash
1. Standard export carton ,then onto pallets, or neutral package
2. If any special requirements on package , it is negotiable
3. All batteries are inspected carefully by QC before shipment.
1. our lead time is 15-30days on the basis of order quantity after getting 30% deposit
2. if you need samples or small quantity , we can ship battery within 3-7days if we have stock after test is finished.
>Minimum order quantity
1. if battery is smaller than 17ah,MOQ would be 200-1000pcs as per actual battery size if battery is bigger than 17ah,
MOQ would be 50-200pcs as per actual battery size.
2. if order is big quantity or 1*20'fcl load , the price would be much competitive.
Contact Person: Willy