YTX4LBS 12v4ah Mini Motorcycle Battery

12v 4ah Mini Motorcycle Battery YTX4L-BS Lead Rechargeable Battery Motorcycle Battery

How to maintain the battery

1.Check the liquid level regularly, if the liquid level is below the horizontal line. Please fill up to the upper level with distilled water or purified

   water in time. Never add sulfuric acid to dissolve waves. After adding liquid, the locomotive should be run for a period of time to make the

   electrolyte mixed evenly:

2.If the battery has no electrolyte. Or the battery is short of about half of the electrolyte or overcharged, the life of this battery is basically

  terminated, even if it can be used after adding the electrolyte, the time will not be too long. . If the battery is in use, there is no battery solution.

  It means that if the charging current is too large, the capacity and life of this kind of dried electro-hydraulic battery will be sharply reduced, and

  it will even fail directly. .If the battery power is insufficient, please remove the battery to recharge it in time. If the battery is not charged in time,

  used for a long time without full charge, etc., it will cause the battery to vulcanize, reduce the battery capacity and shorten the life, and even

  the battery cannot be used.

3.It should be noted that the battery has been in the state of power for a long time,-part of the active material lead dioxide (pbo2) will always

  become dense lead sulfate (pbso4) and cannot be reduced to lead dioxide (pbo2), resulting in a decrease in capacity and a shortened life: If

  the battery is not charged for a long time after being discharged, the lead dioxide (pbo2) will become dense lead sulfate (pbso4) and then can

  no longer be reduced to lead dioxide (pbo2). This will lead to the end of battery life.

 

>Specification

 

Battery Model No.		12V 3ah
Nominal Voltage		12V
Capacity(10HR/25℃)		3Ah
Dimension	Length	113±2mm
	Width	70±2mm
	Height	85mm
Approx. Weight		0.95kg
Operating temperature range		-20℃-50℃(-4℉-122℉)
Standard charging method(25℃)	Current	0.9A
	Time	5-10h
Quickly charging method(25℃)	Current	4.5A
	Time	1H
Terminal Material		Lead
Container Material		ABS

 

 

>Structure and composition

 

Component	Pos. plate	Neg. plate	Container	Cover	Separator	Electrolyte	Safety valve	Terminal
Raw material	lead dioxide	lead	ABS	ABS	AGM	Sulfuric acid	Rubber	Copper

 

 

>Discharge diagram

 

>Production process

 

 

 

 

 

>Delivery & Payment Terms

 

Payment Terms	T/T	EXW	30% in advance for deposit payment, the balance payments will be paid before shipment.
		FOB
		CFR/C&F	30% in advance for deposit payment, the balance will be paid against copy of B/L
		CIF
	L/C	For the amount of one shipment above 50,000 usd, L/C at sight is acceptable.
	West Union	For the amount less than 5000 usd
	Paypal
Delivery Time	7~25 days after receiving the payment or the deposit payment

 

 

>Our Services

 

Samples and OEM, Warranty and After-Sale Service:

 

Sample can be provided for quality testing

 

OEM Welcomed

 

Warranty:2 Year

 

After-Sale Service: 24 Hour-Hot Line for Consultacncy and Technical Support

 

✓ Support OEM

✓ Raw material 99.99% pure lead

✓ Comply with international standards, such as GB | JIS | DIN | SAE..etc

✓ Green and recyclable, environmental certification

✓ Strict quality management

✓ More than 20 years of production experience

 

>Safety Guidelines

 

1. Please use the battery properly and avoid leakage, as the electrolyte solution inside may corrode metal, cotton product and stone.

 

2. Please do no place the battery down on its side or upside down in case of leakage.

 

3. Hydrogen (highly flammable/explosive) will be generated during charging or discharging. Please make sure to follow the instructions below:

 

3.1 Please always maintain and use the battery in a well ventilated area.

 

3.2 Please keep away from sparks or open flames.

 

3.3 If the battery is charged outside a vehicle, please do not installe right after charging.

 

Wait for at least 10 minutes to release the hydrogen generated inside before installation.

 

3.4 If the battery is installed inside a vehicle, please do not unload right after riding. Wait for at least 10 minutes before operation.

 

3.5 The environment temperature should not be higher than 45"C during charge.

 

Please cool it off with water or reduce the charging current and voltage.

 

4. Please DO NOT place any metal material near the terminals in case of short circuit.

 

5. Please DO NOT knock the terminal with hammer during battery installation.

 

6. Please be careful when carrying or moving the battery in case of dropping or bumping.