Product Details:
|
Product Name: | AGM Battery | Model: | FBR12-200 |
---|---|---|---|
Nominal Voltage: | 12V | Capacity: | 200AH |
Terminal: | F13 | Dimension: | 522*238*221mm |
Weight: | 59.5kg | Battery Cell: | Sealed Lead Acid |
Guarantee: | 3Years | Reusability: | Rechargeable |
Apply: | Solar System, Wind,Telecom | ||
High Light: | 221mm Lead Acid AGM Battery,124Ah Lead Acid AGM Battery,221mm Maintenance Free Motorcycle Battery |
Maintenance Free solar AGM Lead Acid Battery 200Ah lead acid storage battery
>Main Features
*what does AGM stand for?
AGM means absorbent glass mat and refers to the fine glass fiber separator between the positive and negative plates that
helps absorb all the battery acid. AGM Batteries are advanced lead-acid batteries.
*What do you need to know: AGM Battery?
We’ve already given the most straightforward answer to the question, but there is more to a complete response when asked,
“what is an AGM Battery.” AGM or Absorbent Glass Mat batteries are advanced maintenance-free lead-acid batteries designed to
resist spilling acid and reduce water loss during usage.
we will cover some of the basics about AGM batteries, including what sets them apart from conventional style batteries and some of
the advantages and disadvantages.Conventional batteries may be referred to as “flooded” because they contain electrolyte that moves
freely inside the battery encasement. This design used to be the standard style of lead-acid batteries but has since lost popularity in favor
of sealed AGM batteries.While conventional batteries are still the most cost-effective lead-acid batteries, they often have a shorter lifespan
and require regular maintenance.
*What are the Advantages of AGM Batteries?
AGM batteries hold their charge well and are less likely to sulfate when compared to regular wet cell batteries (conventional batteries types).
Because of this, they are an excellent choice for vehicles that require off-season storage.
AGM batteries can be mounted in more flexible orientations than conventional batteries because the liquid is sealed inside the battery.
Because the liquid electrolyte flows freely inside conventional batteries, they must be mounted and stored upright to prevent leakage.
Battery Model No. | FBR12V200Ah | |
Nominal Voltage | 12V | |
Capacity | 20HR(5.25V) | 200Ah |
(25ºC) | 10HR(5.25V) | 176Ah |
1HR(4.80V) | 124Ah | |
Dimension | Length | 522±2mm |
Width | 238±2mm | |
Height | 218±2mm | |
Total height | 221±2mm | |
Approx. Weight | 59.5kg±4% | |
Terminal type | F13 | |
Internal resistance (Fully charged,25ºC) |
Approx 3.5mΩ | |
Capacity affected by | 40ºC | 102% |
temperature(20HR) | 25ºC | 100% |
0ºC | 85% | |
-15ºC | 65% | |
Self-discharge | 3month | Remaining Capacity:91% |
(25ºC) | 6month | Remaining Capacity:82% |
12month | Remaining Capacity:65% | |
Nominal operating temperature | 25ºC±3ºC(77ºF±5ºF) | |
Operating | Discharge | -15ºC-50ºC(5ºF-122ºF) |
temperature range | Charge | -10ºC-50ºC(14ºF-122ºF) |
Storage | -20ºC-50ºC(-4ºF-122ºF) | |
Float charging voltage | 13.5 to 13.8V | |
(25ºC) | Temperature compensation:-18mV/ºC | |
Cyclic charging voltage | 14.5 to 15V | |
(25ºC) | Temperature compensation:-30mV/ºC | |
Max charging current | 60A | |
Max discharging current | 1600A(5sec.) | |
Designed floating life(20ºC) | 10years |
Component | Positive plate | Negative plate | Container | Cover | Separator | Electrolyte | Safety valve | Terminal |
Raw material | Lead dioxide | Lead | ABS | ABS | AGM | Sulfuric acid | Rubber | Copper |
It is widely used in communication equipment, UPS/EPS power supply, medical equipment, emergency lamp,
aviation signal, railway signal,alarm and safety system, instrument and instrument system.
F.V/Time | 10min | 15min | 30min | 60min | 2h | 3h | 4h | 5h | 8h | 10h | 20h |
9.6V | 436 | 336 | 201 | 124 | 73.1 | 52 | 42 | 35.9 | 24.7 | 20.4 | 10.8 |
9.9V | 423 | 328 | 197 | 122 | 72.6 | 51.7 | 41.8 | 35.7 | 24.5 | 20.3 | 10.8 |
10.2V | 405 | 316 | 191 | 119 | 72 | 51.4 | 41.5 | 35.4 | 24.4 | 20.3 | 10.7 |
10.5V | 388 | 305 | 186 | 116 | 70.9 | 51 | 41.2 | 35.2 | 24.2 | 20.1 | 10.7 |
10.8V | 366 | 289 | 179 | 113 | 69.1 | 49.5 | 41 | 34.1 | 23.5 | 20 | 10.6 |
>Constant Power Discharge Characteristics(Watt,25ºC)
F.V/Time | 10min | 15min | 30min | 60min | 2h | 3h | 4h | 5h | 8h | 10h | 20h |
9.60V | 4709 | 3689 | 2255 | 1409 | 846 | 612 | 494 | 424 | 293 | 243 | 129 |
9.90V | 4568 | 3601 | 2210 | 1388 | 841 | 608 | 491 | 422 | 292 | 243 | 129 |
10.2V | 4379 | 2468 | 2142 | 1353 | 834 | 604 | 488 | 419 | 290 | 242 | 129 |
10.5V | 4191 | 3350 | 2091 | 1324 | 821 | 600 | 485 | 416 | 287 | 240 | 128 |
10.8V | 3955 | 3173 | 2014 | 1284 | 800 | 582 | 470 | 404 | 279 | 239 | 127 |
Contact Person: Mr. Roger Ning
Tel: +86 139 6163 5976
Fax: 86-512-50176362