|Feature:||Low Self Discharge||Application:||Telecom,Electric Utilities,Control Equipments, Security Systems|
F12 OPzV Tubular Gel Battery,
Gray OPzV Tubular Gel Battery,
Military 2v 1500ah battery
High Capacity Tubular Traction Lead Rechargeable Battery lead acid Battery 2V 1500ah
We are providing a wide range of Motive Power Battery. Traction Lead Acid Tubular Traction Battery is used to provide motive power for electric vehicles.
The major emphasis while designing traction battery is on the necessity of a high capacity of weight to volume ratio, since the vehicle must also carry its power source. Traction batteries are frequently deep cycled and require a fast charging rate for use, usually within 24 hours. Typical applications are motive power for forklifts and electric carts. Traction batteries are usually of the tubular plate design, which perform more favorably during deep cycle operation.
1.Long design life, more than 1500 cycles at 80% DOD
2.Using Barton oxide to make battery life longer
3.Extra capacity 5% to 8%
4.Excellent cycle performance and recovery ability after deep discharge
5.Excellent low temperature performance
6.Reliable sealing structure
7.Special design to prevent the short circuit of battery
8.Automatic watering system and gas mixing system (optional)
Capacity range: 45Ah-3000Ah
Floating design life (25'C): 20 years (2V)
18 years (12V)
Cycle life: 5500 at 30% DOD (2V)
4800 at 30% DOD (12V)
Self discharge rate < 2%/month;
High charge acceptance performance;
Wide operation temperature: -40C~60"C
Good deep discharge recovery performance.
1. Forklifts,Electric Forklift
2. Pallet trucks,
3. Underground mining locomotives,
4. Subway tunnel locomotives
5. Other powered vehicle:,Electric Stacker,Electric Truck,Electric Flat Car,Electric Locomotive.
1. Electrolyte: gel electrolyte uses imported silica, special tenichnics make it in a gel immobilized state, safer than AGM type battery;
special additives make it very stable, lower internal resistance and no stratification;
2. Positive plate: tubular type ,with die- casting thick Pb-Ca grid; it has very good corrosion resistance and a very long service life;
3. Negative plate: pasted flat type, radial grid design ,good high rate discharge performance;
4. Separator: PVC-SiO2 separator imported from Europe, low internal resistance, high pore rate and long life;
5. Flooded electrolyte design: contain more electrolyte like a floodedbattery, space between plates and separators is full of electrolyte
thus means good heating capacity and avoid "thermal runaway";
6. Safety valves: good sensitivity, safe and reliable , equipped with double flame arrester/acid filter;
7. Battery case: made of high strength ABS and durable design.
1. Sealed construction,safty and no leakage;
2. Maintenance-free,convenient for installation;
3. Broad operating temperature range;
4. High capability,high energy density;
5. Low self-discharge tate,more deep cycle times;
6. Long service life,excellent recharge and discharge time than other batteries.
Contact Person: Sales Manager